Take the opportunity and check the outstanding measurement tools at the booth of UGT/Picarro at the annual meeting of the German Soil science Society. Meet our team in entrance hall of the University Bern.
All visitors of our booth get special discount on our:
- Ready-To-Go lysimeters
- FullRange Tensiometer
- ku-pF 4.2 SP
- UMP-2 BT+
- Picarro analyzers
Take the opportunity to meet Peter Swinkels from Picarro at our booth
Our series of Ready-To-Go lysimeter which consists of highly sophisticated smaller and medium sized lysimeter stations for soil columns are offered with a diameter of 300, 500 or 800 mm and we provide lengths of 300, 600 or 900 mm. Like our big UGT container stations with 1m² or 2m² also the smaller RTGs are weighable and collect the seepage water to allow direct evapotranspiration measurements. The RTGs are suitable for both disturbed (filled by hand) and undisturbed soil monoliths.
Full Range Tensiometer 2.0
Measurements up to the permanent wilting point pF 4.2
With the Full Range Tensiometer 2.0, UGT GmbH offers a further development of the maintenance-free, innovative polymer-filled tensiometer with integrated temperature measurement. The new polymer composition enables an even shorter reaction time. A pressure range of 1000 kPa is reached in a few minutes.
The new ku-pF 4.2 SP determines the soil water retention curve (pF-curve) and the hydraulic conductivity curve of soil samples according to the evaporation method. It measures the soil water tension up to the permanent wilting point (pF=4.2) by combining the precision of waterand
polymer-filled tensiometers with the latest RFID technology, which allows non-contact and continuous measurements in soil cores up to a volume of 3 liter in a single place measuring station.
The complete ranges of the pF and hydraulic conductivity curves provide information on how much soil water is actually available for plants and trees, especially among modified climate conditions. All measured values are continuously logged by the device and can be read out with an external computer.
UMP-2 BT+ combined soil moisture, temperature and electrical conductivity probe
wireless and robust
The UMP-2 BT+ sensor is the wireless version of the UMP-2 sensor. The sensor has an internal logger for data collection and storage and thus enables independent operation without disturbing cables or external loggers. Data gaps due to defective cables e.g. caused by animals belong to the past. Site disturbance in particular preferential flow paths are reduced to a minimum. Logged and live data is transmitted via Bluetooth LE (low energy). The UMP-2 BT+ can be completely buried for a vertical or horizontal installation.
G2103 Gas Concentration Analyzer|
The Picarro G2103 gas concentration analyzer provides precise, real-time measurement of ammonia (NH3) and water (H2O) vapor. It incorporates coated components in the critical gas pathway.
G2106 Gas Concentation Analyzer|
Detect and measure ethylene in fruit and flower ripening, natural gas production, or use ethylene production as a proxy for N2 fixation.
G2121-i Isotope and Gas Concentration Analyzer|
The Picarro G2121-i isotope and gas concentration analyzer measures δ13C in high carbon dioxide (CO2) concentration (2000 – 4000 ppm) and CO2 gas concentration when it is coupled to a sample preparation peripheral such as a Bulk Combustion Module (A0201).
|G2121-i||δ13CCarbon Dioxide (CO2)Isotopic Carbon Dioxide (iCO2)|
G2131-i Isotope and Gas Concentration Analyzer|
The Picarro G2131-i isotope and gas concentration analyer precisely, simultaneously, and continuously measures δ13C in carbon dioxide (CO2) and CO2 and CH4 gas concentration for a range of applications from atmospheric and ocean science research to food and beverage origin and authenticity.
|G2131-i||δ13CCarbon Dioxide (CO2)Isotopic Carbon Dioxide (iCO2)|
G2201-i Isotopic Analyzer|
The Picarro G2201-i isotope analyzer precisely and continuously measures δ13C in carbon dioxide (CO2) and in methane (CH4) to help understand the biological and geological mechanisms that produce and consume CO2.
|G2201-i||δ13CCarbon Dioxide (CO2)Methane (CH4)Isotopic Carbon Dioxide (iCO2)Isotopic Methane (iCH4)|
G2308 Gas Concentration Analyzer|
The Picarro G2308 gas concentration analyzer provides simultaneous, precise measurement of nitrous oxide (N2O), methane (CH4), and water (H2O) vapor at parts-per-billion (ppb) sensitivity with negligible drift for agriculture soil science, ecology, and emissions quantification.
|G2308||Nitrous Oxide (N2O)Methane (CH4)Water (H2O)|
G2311-f EC Flux Gas Concentration Analyzer|
The Picarro G2301-f flux gas concentration analyzer provides simultaneous, precise measurement of carbon dioxide (CO2), methane (CH4), and water (H2O) vapor at 10 Hz for eddy covariance, gradient, and eddy accumulation methodologies.
|G2311-f||Carbon Dioxide (CO2)Methane (CH4)|
G2508 Gas Concentration Analyzer|
The Picarro G2508 gas concentration analyzer provides simultaneous, precise measurement of nitrous oxide (N2O), methane (CH4), carbon dioxide (CO2), ammonia (NH3), and water (H2O) vapor at parts-per-billion (ppb) sensitivity with negligible drift for agriculture soil science, ecology, and emissions quantification.
|G2508||Carbon Dioxide (CO2)Methane (CH4)Nitrous Oxide (N2O)Water (H2O)Ammonia (NH3)|
GasScouterTM G4301 Mobile Gas Concentration Analyzer|
The Picarro GasScouter™ G4301 is a new-generation, light-weight, portable, battery-powered gas concentration analyzer designed for science on the move.
|G4301||Carbon Dioxide (CO2)Methane (CH4)|
G5131-i Isotope and Gas Concentration Analyzer|
The Picarro G5131-i isotopic and gas concentration analyzer enables simultaneous measurements of site specific and bulk δ15N and δ18O in N2O. It is an ideal solution for discerning and measuring the source of N2O emissions real-time in the field or through grab-sample measurements in the lab.
|G5131-i||δ15Nδ18ONitrous Oxide (N2O)Isotopic Nitrous Oxide (iN2O)|
We are looking forward to meet you at our booth!